Highly conductive silver-coated copper flake creates a smooth, hard, and abrasion resistant finish. Most commonly used for the interior of plastic enclosures to suppress EMI / RFI emissions. It excels when higher levels of shielding are required, providing nearly the same performance as silver, but at significantly lower cost.
Ask An ExpertArticles & Videos
This copper conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
843ER, our Silver-Coated Copper Epoxy Paint, is a 2-part epoxy-based conductive coating, pigmented with highly conductive silver-coated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood.
This architectural electromagnetic shielding paint is a 1-part, water-based conductive paint, pigmented with highly conductive silver coated copper flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush, or roller. It is excellent for use on wood and drywall and bonds well to many plastics. It can be painted over with common architectural paints.
This copper conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
843ER, our Silver-Coated Copper Epoxy Paint, is a 2-part epoxy-based conductive coating, pigmented with highly conductive silver-coated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood.
This architectural electromagnetic shielding paint is a 1-part, water-based conductive paint, pigmented with highly conductive silver coated copper flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush, or roller. It is excellent for use on wood and drywall and bonds well to many plastics. It can be painted over with common architectural paints.
