Powered by Google Translate

English Chinese (Simplified) French German Italian Japanese Korean Portuguese Russian Spanish

New

This is a list of all new MG Chemicals products!

4902P - Sn42Bi57Ag1 Low Temperature Solder Paste

The 4902P Sn42Bi57Ag1 Low Temperature Solder Paste is made for low temperature applications.

8329TCF - Fast Cure Thermally Conductive Adhesive

This is a two-part, smooth, off white paste that cures to form a hard, durable polymer that is extremely thermally conductive, yet electrically insulating. It is extremely viscous because it is highly filled with thermally conductive ceramic powders for maximum thermal conductivity. It adheres strongly to metals, glass, and it adheres well to most plastics used in electronic assemblies.

841WB - Super Shield™ Water Based Nickel Conductive Coating

The 841WB Super Shield™ Water Based Nickel Conductive Coating is a one-part urethane system pigmented with highly conductive nickel flake.

843ER - Super Shield™ Silver Coated Copper Epoxy Conductive Coating

The 843ER Super Shield™ Silver Coated Copper Epoxy Conductive Coating is an extremely durable, highly conductive epoxy paint.

841WB-15ML - Super Shield™ Water Based Nickel Print

The 841WB-15ML - Super Shield™ Water Based Nickel Print is a conductive paint designed to reduce electromagnetic or radio frequency interference (EMI/RFI) in architectural and electronic applications.

  • Provides effective EMI / RFI shielding over a broad range of frequencies
  • Can be applied by sprayer, roll, or brush
  • One part ready to use system, no dilution required
  • Excellent adhesion to drywall and plastics

838AR - Total Ground™ Carbon Conductive Coating

An economical solution for grounding or low frequency RFI shielding applications, especially electric guitars and other electronic instruments. It is ideal for RFI shielding in metal detectors and other devices affected by the presence of metal.

838AR-15ML - Super Shield™ Carbon Print

An economical solution for grounding or low frequency RFI shielding applications, especially electric guitars and other electronic instruments. It is ideal for RFI shielding in metal detectors and other devices affected by the presence of metal. It can also be used as the conductive inner coating in picture tubes, or as a resistor in circuitry. It functions as a conductive undercoat in some electroplating applications.

  • Provides >52 dB of RFI shielding at frequencies <1 MHz
  • Volume resistivity of 0.33 Ω·cm for liquid; 0.34 Ω·cm for aerosol
  • Can be applied by spray, aerosol, brush, or pen
  • Strong corrosion resistance, suitable for marine environments

9620 - Ethyl Acetate

The 9620 Ethyl Acetate is a fast evaporating, low-boiling point solvent that is fairly inert. The solvent is a is commonly used in adhesives and nail polish removers.

9630 - Ethyl Lactate

The 9630 Ethyl Lactate is a green solvent with effectiveness comparable to petroleum-based solvents. It is 100% biodegradable and biomass derived, as well as being environmentally safe.

9640 - Methyl Amyl Ketone (MAK)

The 9640 Methyl Amyl Ketone (MAK) is a slow evaporating solvent with high activity. It has a low density, which reduces its contribution to VOC content of coatings.

9650 - Methyl Ethyl Ketone (MEK)

The 9650 Methyl Ethyl Ketone (MEK) is a moderately, fast drying solvent that shows very good solvency for many synthetic and natural resins used in inks and coatings.

9660 - n-Butyl Acetate

The 9660 n-Butyl Acetate is a moderately fast drying thinner for use with MG Chemical’s conformal coating products.

9680 - Toluene

The 9680 Toluene is a medium evaporation solvent with high solvent strength that is widely used in the paint, chemical, and pharmaceutical industries.

9690 - Xylene

The 9690 Xylene is a medium evaporation solvent with high solvent strength that is widely used in the paint and chemical industry.

9610 - Dimethyl Carbonate

The 9610 Dimethyl Carbonate is a fast evaporating, low toxicity, flammable solvent that is VOC exempt under Canadian and USA regulations.

841AR - Super Shield™ Nickel Conductive Coating

The 841AR Super ShieldTM Nickel Conductive Coating is the standard choice for shielding plastic electronic enclosures or for use on satellite dishes.It functions as a conductive undercoat in many electroplating applications.

841AR-15ML - Super Shield™ Nickel Print

The 841AR-15ML Super Shield™ Nickel Print is the standard choice for shielding plastic electronic enclosures or for use on satellite dishes.It functions as a conductive undercoat in many electroplating applications.

  • Provides effective EMI/RFI shielding over a broad frequency range
  • Volume resistivity of 0.0040 Ω·cm for liquid; 0.0076 Ω·cm for aerosol
  • Can be applied by spray, aerosol, brush, or pen
  • Corrosion resistant, suitable for marine environments

841ER - Super Shield™ Nickel Epoxy Conductive Coating

The 841ER Super Shield™ Nickel Epoxy Conductive Coating is a two-part system pigmented with highly conductive nickel flake.

842AR - Super Shield™ Silver Conductive Coating

The 842AR Super ShieldTM Silver Conductive Coating provides the highest level EMI/RFI shielding for electronic enclosures. It is suitable for board level applications. It functions very well as a conductive undercoat in most electroplating applications.

842AR-15ML - Super Shield™ Silver Print

The 842AR-15ML Super ShieldTM Silver Print provides the highest level EMI/RFI shielding for electronic enclosures. It is suitable for board level applications. It functions very well as a conductive undercoat in most electroplating applications.

  • Provides extreme EMI/RFI shielding over a broad frequency range
  • Volume resistivity of 0.0001 Ω•cm for liquid; 0.000076 Ω•cm for aerosol
  • Can be applied by spray, aerosol, brush, or pen
  • Extremely corrosion resistant, suitable for harsh marine environments
  • Low VOC content, MEK free